H3C Technologies H3C MSR 50 - Manual (Page 134)

Step Command Remarks
Optional.
By default, an NQA operation
performs one probe.
352. Specify the probe times. probe count times
The voice operation can perform
only one probe, and does not
support this command.
Optional.
By default, the timeout time is 3000
milliseconds.
353. Specify the probe timeout
time.
probe timeout timeout
This setting is not available for the
UDP jitter or voice operation.
Optional.
354. Specify the TTL for probe
packets.
20 by default.
ttl value
This setting is not available for the
DHCP operation.
Optional.
355. Specify the ToS value in the IP
packet header of probe
packets.
0 by default.
tos value
This setting is not available for the
DHCP operation.
Optional.
356. Enable the routing table
bypass function.
Disabled by default.
route-option bypass-route
This setting is not available for the
DHCP operation.
Configuring the collaboration function
Collaboration is implemented by associating a reaction entry of an NQA operation a track entry. The
reaction entry monitors the NQA operation. If the number of operation failures reaches the specified
threshold, the configured action is triggered.
To configure the collaboration function:
Step Command Remarks
357. Enter system view. system-view N/A
358. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag By default, no NQA operation is
created.
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo } The collaboration function is not
available for the UDP jitter and
voice operations.
359. Specify an NQA operation
type and enter its view.
reaction item-number
checked-element probe-fail
threshold-type consecutive
consecutive-occurrences
action-type trigger-only
Not configured by default.
360. Configure a reaction entry.
You cannot modify the content of
an existing reaction entry.
121