H3C Technologies H3C MSR 50 - Manual (Page 17)

Step Command Remarks
Optional.
By default, the MIB view
ViewDefault is predefined and its
OID is 1.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB subtree masks
multiple times, the most recent
configuration takes effect. Except
for the four subtrees in the default
MIB view, you can create up to 16
unique MIB view records.
snmp-agent mib-view { excluded |
included } view-name oid-tree
[ mask mask-value ]
5. Create or update a MIB view.
snmp-agent group v3 group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ] [ acl
acl-number | acl ipv6
ipv6-acl-number ] *
6. Configure an SNMPv3 group. By default, no SNMP group exists.
snmp-agent calculate-password
plain-password mode { 3desmd5 |
3dessha | md5 | sha }
{ local-engineid |
specified-engineid engineid }
7. Convert a plaintext key to a
ciphertext (encrypted) key.
Optional.
snmp-agent usm-user v3
user-name group-name [ [ cipher ]
authentication-mode { md5 | sha }
auth-password [ privacy-mode
{ 3des | aes128 | des56 }
priv-password ] ] [ acl acl-number |
acl ipv6 ipv6-acl-number ] *
8. Add a user to the SNMPv3
group.
N/A
Optional. 9. Configure the maximum
SNMP packet size (in bytes)
that the SNMP agent can
handle.
snmp-agent packet max-size
byte-count By default, the SNMP agent can
receive and send SNMP packets
up to 1500 bytes.
Configuring SNMPv1 or SNMPv2c basic parameters
Step Command Remarks
10. Enter system view. system-view N/A
4