H3C Technologies H3C MSR 50 - Manual (Page 137)

Step Command Remarks
• Enable sending traps to the NMS when specified conditions are
met:
reaction trap { probe-failure consecutive-probe-failures |
test-complete | test-failure cumulate-probe-failures }
• Configure a reaction entry for monitoring the duration of an
NQA operation (not supported in UDP jitter and voice
operations):
reaction item-number checked-element probe-duration
threshold-type { accumulate accumulate-occurrences | average
| consecutive consecutive-occurrences } threshold-value
upper-threshold lower-threshold [ action-type { none |
trap-only } ]
• Configure a reaction entry for monitoring failure times (not
supported in UDP jitter and voice operations):
reaction item-number checked-element probe-fail threshold-type
{ accumulate accumulate-occurrences | consecutive
consecutive-occurrences } [ action-type { none | trap-only } ]
Configure the
trap sending
method as
needed.
• Configure a reaction entry for monitoring the round-trip time
(only supported in UDP jitter and voice operations):
reaction item-number checked-element rtt threshold-type
{ accumulate accumulate-occurrences | average }
threshold-value upper-threshold lower-threshold [ action-type
{ none | trap-only } ]
No traps are
sent to the NMS
by default.
367. Configure
threshold
monitoring.
• Configure a reaction entry for monitoring packet loss (only
supported in UDP jitter and voice operations):
reaction item-number checked-element packet-loss
threshold-type accumulate accumulate-occurrences [ action-type
{ none | trap-only } ]
The reaction
trap command
in voice
operation view
only supports
the
test-complete
keyword.
• Configure a reaction entry for monitoring one-way jitter (only
supported in UDP jitter and voice operations):
reaction item-number checked-element { jitter-ds | jitter-sd }
threshold-type { accumulate accumulate-occurrences | average }
threshold-value upper-threshold lower-threshold [ action-type
{ none | trap-only } ]
• Configure a reaction entry for monitoring the one-way delay
(only supported in UDP jitter and voice operations):
reaction item-number checked-element { owd-ds | owd-sd }
threshold-value upper-threshold lower-threshold
• Configure a reaction entry for monitoring the ICPIF value (only
supported in the voice operation):
reaction item-number checked-element icpif threshold-value
upper-threshold lower-threshold [ action-type { none |
trap-only } ]
• Configure a reaction entry for monitoring the MOS value (only
supported in the voice operation):
reaction item-number checked-element mos threshold-value
upper-threshold lower-threshold [ action-type { none |
trap-only } ]
124