H3C Technologies H3C MSR 50 - Manual (Page 203)

Step Command Remarks
476. Enter system view. system-view N/A
Optional.
477. Enable the information center. info-center enable
Enabled by default.
Optional.
info-center channel
channel-number name
channel-name
478. Name the channel with a
specified channel number.
See Table 6 for default channel
names.
Optional.
info-center monitor channel
{ channel-number |
channel-name }
By default, system information is
output to the monitor terminal
through channel 1 (known as
monitor).
479. Configure an output channel
for the monitor terminal.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
480. Configure an output rule for
the monitor terminal.
See "Default output rules of system
information."
Optional.
481. Configure the timestamp
format.
info-center timestamp { debugging
| log | trap } { boot | date | none }
By default, the timestamp format
for log, trap and debug
information is date.
482. Return to user view. quit N/A
The default setting is disabled.
You must first execute this
command, and then you can
enable the display of debugging,
log, and trap information on the
monitor terminal.
483. Enable system information
output to the monitor terminal. terminal monitor
• Enable the display of debug
information on the monitor
terminal:
terminal debugging
Optional. • Enable the display of log
information on the monitor
terminal:
terminal logging
484. Enable the display of system
information on the monitor
terminal.
By default, the monitor terminal
displays log and trap information,
and discards debug information.
• Enable the display of trap
information on the monitor
terminal:
terminal trapping
For more information about terminal access, see Terminal Access Configuration Guide.
190