H3C Technologies H3C MSR 50 - Manual (Page 21)

Step Command Remarks
23. Enter system view. system-view N/A
snmp-agent target-host trap
address udp-domain { ip-address |
ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance
vpn-instance-name ] params
securityname security-string [ v1 |
v2c | v3 [ authentication |
privacy ] ]
If the trap destination is a host. The
ip-address argument must be the IP
address of the host. 24. Configure a target host.
The vpn-instance keyword is
applicable in an IPv4 network.
Optional.
snmp-agent trap source
interface-type { interface-number |
interface-number.subnumber }
25. Configure the source address
for traps.
By default, SNMP chooses the IP
address of an interface to be the
source IP address of traps.
Optional.
By default, standard
linkUp/linkDown traps are used.
Extended linkUp/linkDown traps
add interface description and
interface type to standard
linkUp/linkDown traps. If the NMS
does not support extended SNMP
messages, use standard
linkUp/linkDown traps.
26. Extend the standard
linkUp/linkDown traps.
snmp-agent trap if-mib link
extended
Optional.
The default trap queue size is 100.
27. Configure the trap queue size. snmp-agent trap queue-size size
When the trap queue is full, the
oldest traps are automatically
deleted for new traps.
Optional.
28. Configure the trap holding
time.
The default setting is 120 seconds.
snmp-agent trap life seconds
A trap is deleted when its holding
time expires.
Displaying and maintaining SNMP
Task Command Remarks
Display SNMP agent system
information, including the contact,
physical location, and SNMP
version.
display snmp-agent sys-info [ contact | location
| version ]* [ | { begin | exclude | include }
regular-expression ]
Available in any view.
display snmp-agent statistics [ | { begin |
exclude | include } regular-expression ]
Display SNMP agent statistics. Available in any view.
display snmp-agent local-engineid [ | { begin |
exclude | include } regular-expression ]
Display the local engine ID. Available in any view.
8