ACTi V11 User Manual
Page 80
Encoder Firmware User
’s Manual H1.02.30
Unmount
Once the drive has been mounted, it can later be unmounted by pressing
the “Unmount” button, if
necessary.
That Unmount function is used when the encoder is to be shut down for maintenance or when the
mass storage has to be physically removed for some reason. The purpose of unmounting is to
protect the currently processed data on mass storage at the moment of removal of the storage. If
the local storage is being used by the encoder and some videos are being recorded to the disk,
then the sudden shutdown or removal of the disk without unmounting may corrupt the file that is
currently being used by the encoder. The rest of the files are not influenced in any way. Please
note that
“Save&Reboot” function of the encoder also does unmounting automatically for the
user.