Privacy mask – ACTi V11 User Manual
Page 55
Encoder Firmware User
’s Manual H1.02.30
Below is the list of characters with special meaning that can be used in the text field:
Parameters
Description
%YYYY
Year in four-digit format. For example, 2008
%YY
Year in two-digit format. For example, 08
%MM
Month in two-digit format. For example, 01 for January, 12 for December
%DD
Date in two-digit format. 01~31
%hh
Hour in two-digit format. 00~23. Note that only 24-hour indication is
supported.
%mm
Minutes in two-digit format. 00~59
%ss
Seconds in two-digit format. 00~59
%H
a hyphen, "-"
%C
a colon, ":"
%X
a slash, "/"
%N
show Camera Name (It might be truncated if exceeds max OSD length)
After changing any of the items above, press
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not Applied yet.
Privacy Mask
The
Privacy Mask
section
allows the user to cover up some sensitive areas of the video that
should not be captured by the device, such as a manager
’s computer screen or bathroom
entrance. It is possible to configure several independent regions for masking.
It is possible to set up to 4 regions of privacy masks. The adjustment of the privacy mask region
can be done when the region is checked under the
Setup
column.
NOTE:
This feature is recommended for fixed and vari-focal cameras only. Due to continuous
camera movements, PTZ and zoom cameras may yield inaccurate results when used with this
feature.