Audio, 59 audio – ACTi V11 User Manual
Page 59
Encoder Firmware User
’s Manual H1.02.30
Audio
The
Audio
submenu is used to configure the audio input and
output settings of the video channel.
Parameters
Description
Channel
(for multi-channel
encoders only)
Select the video channel to adjust its audio settings.
Audio In
The option
“Enabled” would activate incoming audio. The option
“Disabled” would turn off the incoming audio. In such case, the video
stream is captured without audio.
Audio In Level
Use this function to adjust the sensitivity level of the audio input.
NOTE:
Available only if the Audio In is enabled.
Audio In Format
Choose the audio compression format.
NOTE:
Available only if the Audio In is enabled.
Audio Out Volume
The audio out volume level can be adjusted in the scale of 0-100. It
will only influence the volume level of the PC speakers but not the
external speakers connected directly to the encoder.
The volume level can be adjusted from 0 up to 100. Where “0” mutes the audio and 100 is the
maximum volume.
This volume control appears in user interface only when the Audio-in function of the device has
been
Enabled
.