Image – ACTi V11 User Manual
Page 53
Encoder Firmware User
’s Manual H1.02.30
Image
The
Image
section allows the user to control certain parameters of a video frame.
Parameters
Description
Video Flipping /
Video Mirroring
Check this box to flip the video up-down and left-right to achieve the
180-degree rotation effect.
Brightness
Select the Brightness value (0~100). The higher the value, the
brighter the image.
Contrast
Contrast adjusts the separation of the dark and bright areas of an
image. Select the Contrast level (0~100). Increasing contrast makes
the dark areas darker and bright areas brighter.
Saturation
Saturation makes colors appear more vivid. Select the Saturation
level (0~100). The higher the value, the more saturated the image
becomes.
Sharpness
Sharpness makes the contours of the image more distinct. Select the
Sharpness level (0~255). The higher the value, the sharper the
image.
After changing any of the items above, click
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not applied yet.
The
Restore image settings to default
button is a quick way of restoring factory default image
settings without needing to reset the whole device to factory default.