ACTi V11 - Manual (Page 17)

www.acti.com
Encoder Firmware User ’s Manual H1.02.30
17
PTZ Control Panel (for V2x Models only)
The PTZ Control Panel is used only on connected cameras with PTZ capabilities. The PTZ button
is displayed on the Live View screen only when the channel serial port is enabled on the
Host menu (see Serial Setting on page 22). Click the PTZ button on the Live View screen to
display the PTZ Control Panel. On the PTZ Control Panel, users can do any the following:

Set the home position

View the PTZ Vendor/Protocol (this configuration can be set in Serial Setting on page
22.

Pan the device

Zoom the device in or out as well as adjust
the zoom speed and step size

Set the focus to auto refocus or manual

Set Preset points
NOTE: The PTZ Control Panel may differ depending on device model.