Local storage management – ACTi V11 User Manual
Page 77
Encoder Firmware User
’s Manual H1.02.30
Local Storage Management
The cameras that come with built-in local storage capability will have the
Local Storage
menu
shown on the
Setup Page
when a memory card is inserted into the memory card slot of the
device.
Video recording configurations such as the length of recording, video stream, etc. must be setup
on the
Event Configuration
on page 64). After setting the
Upload Video configurations, create an event on the
Event List
72) to either record the video on a scheduled time or when triggered by an event. Note that only
videos can be recorded on the memory card, snapshots are not.
Make sure to “format” the memory card through the Web Configurator before using the card for
the first time or if the card has been used in other devices.
NOTE:
It is recommended to use more than 2 GB of memroy card to ensure recording
perfornance.
Click the
Local Storage
menu on the
Setup Page
. Three (3) submenu items are available
–
Status
,
Utilities
, and
File Management
. If the memory card has not been formatted or mounted,
the
File Management
submenu is grayed out and cannot be accessed.