Event configuration, Digital i/o ports, 64 event configuration – ACTi V11 User Manual
Page 64
Encoder Firmware User
’s Manual H1.02.30
Event Configuration
Event configurations
are the responses to be performed when an event is triggered. For most
types of responses, you can create several different preset responses, then mix and match in
event rules.
The configurable responses are classified as
Digital I/O ports
,
Notification messages
,
Upload
Video/Snapshot and Audio
and
Send URL Commands
.
Digital I/O Ports
Digital input/output ports are used to connect digital input (DI) and digital output (DO) devices. DI
is a trigger
device like a switch or sensor (e.g. “panic button”), which when pressed or triggered,
notifies the device to perform specific actions or the DO device to respond.
DO’s can be alarms or
lights, etc.
The Digital I/O Ports page displays the number of available DI and DO ports on the device, which
varies depending on device model.
Digital I/O Ports Section of V21 / V22
DI:
To configure the digital input device, define the active level and trigger interval of the DI. The
default
Active Level
is
“0”, which means the DI device remains inactive unless triggered. A good