ACTi V11 User Manual
Page 21
Encoder Firmware User
’s Manual H1.02.30
4-Channel Encoder Example
After changing any of the items above, click
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not applied yet.
GPS Position
: This section allows users to manually set the GPS position of each camera
connected to the encoder to find its location on the map when using a Video Management
System (VMS). Click the
Edit
button to configure the GPS position.
4-Channel Encoder Example
Check the
Enabled
box to enable the GPS feature per camera.
Find the camera location on google maps, for example, installed in the airport.