Event, Event server – ACTi V11 User Manual
Page 60
Encoder Firmware User
’s Manual H1.02.30
Event
This section describes how to setup the Event Handler, which deals with how the IP devices
respond to situations. Each IP device can have a maximum of 10 Event Rules. Each rule includes
one single trigger, and one or many responses. Several types of responses are available. And
there are multiple external servers for the device to interact with.
When setting up Event Handler, there are four types of settings. Event Server, Event
Configuration, Event Rules and Manual Event
Click the
item before
Event
to expand the list.
Event Server
Event servers
define whom the device may interact with. They can be other servers or devices
on the network, or even the device itself.
Event Configuration
sets up a list of what to tell the
other party during interaction. Event list lays down the rules and conditions about when to initiate
which responses from which triggers.
The options available for Event rules are selected from
the event servers and event configurations.
Event servers are classified as FTP servers, SMTP servers and HTTP servers