Setup, Access the setup page – ACTi V11 User Manual
Page 19
Encoder Firmware User
’s Manual H1.02.30
Setup
The following chapters guide you through the Setup functions of the device.
Access the Setup Page
To configure any of the device settings, go to the Setup menu by pressing the following button on
Live View page:
- Go to Setup
The left side of the Setup page contains the list of Setup
items.
NOTE:
The exact content of the menu list varies for each
device, depending on the actual capabilities of each device.
This manual, however, is designed to explain all the
possible functions.
Several items in the Setup page are divided into groups, such as Network, IP Settings, etc. You
can expand the groups to see the sub-items by pressing the [+] button.
The following chapters of this manual explain each Setup item separately. The chapters are listed
in the same order as the list of Setup menu items.