ACTi V11 - Manual (Page 18)

www.acti.com
Encoder Firmware User ’s Manual H1.02.30
18
How to Use Pan/Tilt
Click the pan/tilt controls to pan/tilt the PTZ device.
Other pan/tilt features include:

Auto pan/tilt speed : When “Enabled”, the device automatically sets the pan/tilt speed
according to the zoom ratio and the selected pan/tilt speed while retaining the clarity and
quality of image even as the device is panning or tilting. When “Disabled”, the pan/tilt
speed follows the value selected on the Pan/Tilt Speed field.

Pan/Tilt Speed : Select the desired pan/tilt speed. The bigger the number, the faster the
speed is.
TIP: While the PTZ Control Panel is open, instead of using the pan/tilt controls, move the mouse
cursor over the Live View, the mouse cursor will turn into zoom in/out or directional icons
(e.g. / / / / etc.). Click or drag the mouse to zoom in/out or pan/tilt the device
view.
How to Zoom the Device In or Out
To zoom continuously, do the following:
1. On Zoom Control , select the Speed , wherein the bigger the number, the faster is the
zooming speed.
2. Click and hold the left mouse button on zoom in or zoom out . When the
mouse button is released, zooming stops.
How to Set the Home Position
1. Pan, tilt, and zoom on the area that you want to set as the home position.
2. Click the Apply button on the Save current position as home position .
Pan/tilt controls