Multicast setting, 29 multicast setting – ACTi V11 User Manual
Page 29
Encoder Firmware User
’s Manual H1.02.30
Multicast Setting
Multicast
is an Internet protocol where a data stream is sent
only once and shared to requesting devices. This in turn
saves network bandwidth. However, to use this feature, network devices, such as routers and
switches, should support IP multicast.
1-Channel Encoder Example
4-Channel Encoder Example
The Muticast IP, port, and TTL per channel have already been preconfigured. Users may change
these values according to its own network environment.
Parameters
Description
Configuration setting is
based on channel 1
Select to configure Channel 1 multicast settings and use these settings as
a pattern to base the succeeding channel settings. This way, users do not
need to configure the settings one by one.