Port mapping, 28 port mapping – ACTi V11 User Manual
Page 28
Encoder Firmware User
’s Manual H1.02.30
Port Mapping
The
Port Mapping
submenu provides the list of services
and protocols that require their own port number for
communication. By default, the device already has all the ports defined. On this page, the user
can modify the port numbers in case there is a specific need for that. Most often, the HTTP port is
changed to something other than 80 in order to match with easy-to-remember port forwarding
rules of the router that acts as a bridge between local area network and Internet.
NOTE:
Some items appear only if the device model supports the function.
Parameters
Description
HTTP port
Select the port assigned for HTTP protocol access.
HTTPS Port
Select the port assigned for HTTPS protocol access.
Search Server Port1
Select the first port used by server search applications to detect this IP
device (e.g. IP Utility).
Search Server Port2
Select the second port used by server search applications to detect this IP
device (e.g. IP Utility).
Control Server Port
Select the port used to support video control function by application
programs (e.g. NVR).
Streaming Server Port
Select the port used by this IP device for Video Streaming (TCP).
RTSP Server Port
Select the port assigned for RTSP protocol access.
After changing any of the items above, click
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not applied yet. New port settings will only take
effect after clicking
System > Save & Reboot
.