Video channel’s ptz address, 23 video channel’s ptz address – ACTi V11 User Manual
Page 23
Encoder Firmware User
’s Manual H1.02.30
Video Channel’s PTZ Address
The
Video Channel’s PTZ Address
section allows the user to enable the serial port and assign
the PTZ address of a video channel. For multi-channel encoders, all video channels share one (1)
serial port therefore the address for each channel must be defined on this section.
1-Channel Encoder Example
4-Channel Encoder Example
After changing any of the items above, click
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not applied yet.