ACTi V11 User Manual
Page 68
Encoder Firmware User
’s Manual H1.02.30
Upload Video/snapshot and Audio checkbox
: this decides if this rule is in effect, or disabled.
Sometimes it is useful to keep the settings for troubleshooting purposes, but keep them as
disabled.
Upload Media to
: these define the task at hand, and change the field that needs to be filled out.
Upload Period
: IP device will provide video/snapshots for the number of seconds here. It will
stop uploading video/snapshot at the end of this period. If you have video management software
recording from this device at the same time, the normal recording through NVR will not be
affected, and goes on throughout the event period and afterwards. But the special upload session
will end as the event ends.
Image during Upload Period:
This is used only by snapshots. This tells the device how many
snapshots it should attempt to capture during the Upload Time. If this value is set to 0, then the IP
device will attempt to capture as many snapshots as possible. Depending upon the device
loading, the number of snapshots taken may not reach the number you specified.
Upload Media
Type
Snapshot
Video
Upload Media To
FTP
CGI FTP
CGI
Local
Storage
Image during
Upload Period
Y
Y
Y
Pre-Buffer Time
Y
Y
Y
Image File Name
Y
Y
Y
Y
Y
Upload Path
Y
Y
Y
Y
CGI Path &
Program
Y
Y
E-Mail Recipients
Y
Subject
Y
Video Source
Y
Y
Y
Y
Y
Y