ACTi V11 User Manual
Page 30
Encoder Firmware User
’s Manual H1.02.30
Manual
Select to manually configure the settings of all channels.
Channel (number)
Refers to the video channel.
Stream 1
Refers to the video stream 1 of the corresponding channel.
Stream 2
Refers to the video stream 2 of the corresponding channel.
Audio
Refers to the audio stream of the corresponding channel.
Multicast IP
Enter the multicast IP of the corresponding stream.
Network Port
Enter the assigned port of the corresponding stream.
Multcast TTL
Enter the multicast TTL (time-to-live) of the corresponding stream. This
value determines the time span (in seconds) when the packet is retained
in the network. When the time expires and no request is received, the
packet is then discarded.
By Request
When checked, the video or audio stream
will be streamed only to a
particular receiver when that receiver sends a request or in the
case of the Network Video Recorder (NVR), selects to view or
record the channel.
If unchecked,
the video or audio stream will
constantly be streamed to the network whether there are devices
viewing the channel or not.
To save on network bandwidth, it is recommended to check this function.
Once any setting has been changed, scroll down the page and click the
Apply
button to save and
apply the changes.