Status, 78 status – ACTi V11 User Manual
Page 78
Encoder Firmware User
’s Manual H1.02.30
Status
When the mass storage has not been formatted or mounted yet, the encoder would not know the
status of the storage, and the output would be as follows:
If the mass storage has been formatted or mounted already, the Status page will show the details
of the storage:
If there is a memory card installed on the device, the Storage Media Type will show
“Micro SD”.
NOTE:
Supports microSDHC and microSDXC cards only.
The capacity of the disk is shown in Gigabytes.
The file system is Linux based EXT3, which is different from Windows based PC file systems. If
you remove the storage from the encoder and plug it directly to Windows based PC, it may not be
able to read its content. The chapter File Management explains the correct ways of accessing
files on the local storage.