Smtp server – ACTi V11 User Manual
Page 62
Encoder Firmware User
’s Manual H1.02.30
SMTP Server
SMTP servers
can send email upon request from the IP device. The email can be a simple
subject and text email, or attached with snapshot / video. You may setup two SMTP servers. The
device will first attempt to send the message via the Primary email SMTP server. If the first
attempt fails (after the Max connecting time), then the device will attempt to send via the
secondary SMTP server. If the device sends email successfully via the primary SMTP server,
then it will not use the secondary SMTP server.
To setup SMTP servers, make sure to enable the SMTP account and choose the proper
Authentication Type
. There are many types available. The default is
Login
. We recommend you
to use
Auto Detection
. Available authentication types include:
Auto Detection
,
None
,
Login
,
Plain
,
Cram MD5
,
Digest MD5
and
PoP Relay
. Please also enter the
User Name
,
Password
,
the
Email Address
displayed as sender (can be different than the user name),
Network
(SMTP
server)
Address
,
Network
(SMTP server)
Port number
and
Max Connection Time
before
timeout (in
seconds
).
After changing any of the items above, click
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not applied yet.