37 rtp – ACTi V11 User Manual
Page 37
Encoder Firmware User
’s Manual H1.02.30
RTP
The
RTP
submenu allows the user to configure RTP
Settings.
If the
RTSP Authentication
is
Enabled
, then the RTP streaming will require account name and
password authentication.
If the
RTP B2 Frame
is
Enabled
then the B2 frame is added to every video frame, containing
additional information, such as
motion detection status on each frame, digital input and
digital output levels, passive infrared status, other video intelligence data, frame counter,
frame-rate mode and the frame-rate, bitrate, resolution, timestamp and much more
. The
user side can operate with video data easily, including event management, storage consumption
estimation, image resizing for preview, etc.
After changing any of the items above, click
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not applied yet.