Wavecom W-SPECTRA (Automatic Monitoring System) V1.1.0 - Manual (Page 29)

WAVECOM Monitoring System W-SPECTRA, W-SPEED Manual V1.1.0Complete Automatic Monitoring System W-
SPECTRA

19
W-SPECTRA Run menu.
With the menu “Run” the user can switch W-SPECTRA among the three operation modes: “Direct mode”,
“Memory scan” and “Frequency search”. The user can also switch to a mode by clicking the corresponding
button.
Each operation mode defines a different automatic work flow and running behavior of W-SPECTRA.
Configuration Menu
W-SPECTRA Configuration menu.
Configuration menu includes
Startup prefer-
ences
This menu opens a dialog window, in which the user can set the default behavior of W-
SPECTRA at startup.
The user can define which operation mode (Direct mode, Memory scan or Frequency
search) should W-SPECTRA run when it starts.
The user can define which database template should be loaded when W-SPECTRA starts.
The user can define which color scheme should apply to the FFT display and sonagram dis-
play.
SDR settings This menu will open a configuration window where the user can rescan all receivers
(WiNRADiO G3xDDC) which are running on the local computer, choose a receiver (WiNRA-
DiO G3xDDC), connect or disconnect it. The user can set the default values of “Receiver
frequency”, “Demodulator bandwidth”, “Demodulator”, “AGC” and “Squelch level”. When
closing the window the default values are saved. (see “ Direct Receiver Control ” on page
24.)
Customize a data-
base
Open a configuration window where the user can define a database template. (see “ User
Configurable Database ” on page 29.)