Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 69)

W e b S e r v e r I n t e r f a c e 3-37
MRU The Maximum Receive Units configuration option may be set to inform the
peer that the implementation can receive larger packets, or to request that the
peer send smaller packets.
Values: 128–4096
Default: 1500
Port IP Address The IP Address of the port. For unnumbered PPP link, set to 0.0.0.0 and set
IP Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address The IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP over Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)
Initiate Negotiation Determines whether the port actively negotiates with the peer site or passively
waits for negotiation requests.
Values: Yes, No
Default: Yes
Allow PAP Lets the peer to negotiate for PAP.
Values: No, Yes
Default: No
Allow CHAP Lets the peer to negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username This field is used to log on to the peer. Type the appropriate PAP Username
in this field.
Values: User established
Default: Username
PAP Password Enter the password necessary to log on to the peer under a given PAP
Username.
Values: User established
Default: None
CHAP Username Type the appropriate CHAP Hostname in this field.
Values: User established
Default: Hostname