Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 127)

W e b S e r v e r I n t e r f a c e 3-95
Use of Local WANsuite 5160/5130 as a Gateway
If you choose this method, the WANsuite 5160/5130s are totally independent
from the routers, so all units will be accessible as long as the frame relay
network stays up. The IP address assignment is also independent from the
routers. The PC used for management must have the local WANsuite 5160/
5130’s IP address as its gateway address so that it can reach all remote
WANsuite 5160/5130s.
Figure 3.95 Frame Relay Network
In the local WANsuite 5160/5130, the IP address and mask of each remote
WANsuite 5160/5130 will have to be configured in the Endpoint table. The
“In-Band Management” parameter will also have to be set in the
corresponding DLCI. Each remote WANsuite 5160/5130 must be part of a
different IP network address.
PC
Router
A
FSM
FSM
FSM
Router
C
Router
B
WAN SUITE
5160/5130
WAN SUITE
5160/5130
WAN SUITE
5160/5130