Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 166)

4-38 W A N s u i t e 5 1 6 0 / 5 1 3 0
Choose an Index number to bring up a screen in which you can change the
Username and Secret information for that particular CHAP Index.
To change the Username and Secret for a selected CHAP Index, enter the new
information in the appropriate field(s) and press the “Esc” key.
SCADA Service Details Screen
NOTICE: SCADA traffic has a higher priority than other types of traffic flowing
through the unit. Refer to Normal Tx Queue Size on page 4-30 for more
details.
The SCADA Service Details (Figure 4.32) screen lets you access and read or
change the parameters listed below.
Figure 4.32 SCADA Service Details Screen
Message Size Maximum number of octets to buffer before sending a frame.
Values: 0
−
1024
Default: 256
Idle Character Delay Maximum number of idle character time required before sending a frame.
Values: 0
−
65535
Default: 0
Input Terminator Decimal value of the character that terminates a message before sending a
frame.
Values: 0
−
255
Default: 0
Data Direction Data direction that the port will support. If set to “Input,” the port will only
accept incoming data and will not transmit data. If set to “Output,” the port
will ignore any incoming data. If set to “Both,” the port will process all data.
Values: Input, Output, Both
Default: Both