Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 162)

4-34 W A N s u i t e 5 1 6 0 / 5 1 3 0
Virtual PPP Over Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)
Allow PAP This parameter lets the peer negotiate for PAP.
Values: No, Yes
Default: No
Allow CHAP This parameter lets the peer negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username Type the appropriate PAP Username in this field to log on to the peer.
Values: (User Established)
Default: Username
PAP Password Enter the password necessary to log on to the peer under a given PAP
Username.
Values: (User Established)
Default: (None)
CHAP Username Type the appropriate CHAP Hostname in this field to challenge the peer.
Values: (User Established)
Default: Hostname
CHAP Secret Enter the Secret (i.e., password) necessary to challenge the peer.
Values: (User Established)
Default: Secret
Initiate Negotiation Determines whether the port actively negotiates with the peer site or passively
waits for negotiation requests.
Values: Yes, No
Default: Yes
Parameters to Negotiate
The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters