Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 234)

5-16 W A N s u i t e 5 1 6 0 / 5 1 3 0
Figure 5.16 Network 2 Configuration Menu Tree
Mode Selects the network service type.
Values: Long Haul, Short Haul
Default:Long Haul
LBO Sets the transmit Line Build Out (LBO) for the network interface.
Values: 0,
−
7.5,
−
15.0,
−
22.5 dB
Default:0 dB
Level Specifies the DTE DSX-1 interface output level.
Values: 0
−
110, 111
−
220, 221
−
330, 331
−
440, 441
−
550, 551
−
660, >661 ft
Default:0
−110
ft
Framing Selects the framing for the network side of the DSU/ CSU.
Values ESF, D4
Default:ESF
Coding Sets the network side line coding.
Values: AMI, B8ZS
Default:B8ZS
Timing Sets the timing source to synchronize the unit’s internal timing generators. In
all cases, slips are controlled to occur on frame boundaries at the Network
ports when timing synchronization is lost. The options are as follows:
Channel Map
Idle
Thru
T+Sig
Channel 1
Channel 24
Idle
Thru
T+Sig
Net 2
Config
Framing Coding
Timing
LBO
ESF
D4
B8ZS
AMI
Int
Net 2
Serial 2
0
− 7.5
− 15.0
− 22.5
Zero Suppression
Dis
En
PRM
Dis
En
Long-Haul
Shrt-Haul
Level
0-110
111-220
221-330
331-440
441-550
551-660
>661
Mode
Learn DS0 Boot Learn DS0 As Learn DS0 Now