Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 123)

W e b S e r v e r I n t e r f a c e 3-91
Simple Mail Transfer Protocol (SMTP)
Use the SMTP Details Screen (Figure 3.89) to configure the SMTP function
of the WANsuite 5160/5130. SMTP is used to forward notification of events
to a user-definable list of up to five recipients. The even notification is sent as
an e-mail in the following format:
From: [email protected]
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name:
System Location:
System Contact:
Reporting the following event:
OOFS Threshold Exceeded, ifIndex 3, Count 5
The parameters associated with the SMTP Details screen are described below.
Figure 3.89 SMTP Details Screen
Mail Server IP Address IP address of the mail server to which notifications will be sent.
Domain Name Name of domain where the device resides (i.e., Verilink.com)
Mail From E-mail address of the device (WANsuite). While the device will not be able to
retrieve e-mail from a service, the mail needs to have the “From” address
filled in.
Recipient 1...5 E-mail addresses of recipients of event notifications (i.e., [email protected]
or [email protected]).
Encryption
If a DLCI encapsulation is set for FRF.17 instead of RFC1490, all data will
be encrypted using FRF.17 Mode One formats and protocols. However, the
encryption method is Blowfish, rather than the DES specified in FRF.17.