Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 121)

W e b S e r v e r I n t e r f a c e 3-89
The Bridge Details screen provides the following user-activated buttons:
Figure 3.86 Bridge Port Table
The Bridge Port Table screen lets you view the parameters described below
the Bridge Port Details screen. Clicking on a number in the “Index” column
of the Bridge Port Table will bring up the Bridge Port Details screen, which
displays, and, in some cases, lets you change, the parameters described below.
Figure 3.87 Bridge Port Details
Enable Enables or disables Bridging on this port.
Endpoint Endpoint name.
BPDU Option Shows if BPDU packet will be sent and received on this port.
Filter By Multicast
Addr Dest
Filters multicast messages received on this port, which reduces the load on the
WAN connection.
Button Function
Submit Sets any values that have been changed.
Bridge Port Table Displays the Bridge Port Table screen (Figure 3.86) that lets
the user access and configure the Bridge Port Details screen
(Figure 3.87).
Bridge Lookup Table Displays the Bridge Lookup Table screen (Figure 3.88) that
contains all MAC Addresses learned by the Bridge.