Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 244)

A-2 W A N s u i t e 5 1 6 0 / 5 1 3 0
Mode: Long-haul, Short-haul
DSX-1 Level: 0-110, 111-220, 221-330, 331-440, 441-550, 551-660,
>661 ft
Line Build Out: 0,
−
7.5,
−
15,
−
22.5 dB attenuation
Transient Voltage: 1000 V protection, fused input / output
Jitter Control: Per TR 62411 and T1.403
Timing Source: With “Function” parameter in Slave mode, timing parameter
is ignored
With “Function” parameter in Network mode, options are
Internal, Network 2, Serial 2
Ones Density: B8ZS, N x 56 bit stuffing, alternate fill; complies with TR
62411
Serial Interface(s)
Connection: DB-25 female
DTE Ports: Selectable RS-530, RS-232, or V.35
Data Rate: Synchronous, n x 56 kbps or nx 64 kbps (where n = 1–32)
Clocking: Internal, External
IP Gateway
10/100 Ethernet (IP Gateway or Management)
Protocols: RIP1, RIP2, OSPF
Connection: 8-pin modular
Network Protocol: TCP /IP based networks
Data Rate: 10/100 Mbps
Compatibility: 10/100Base-T
Management Interfaces
10/100 Ethernet (Management or IP Gateway)
Connection: 8-pin modular
Network Protocol: TCP /IP based networks
Data Rate: 10/100 Mbps
Compatibility: 10/100Base-T
Supervisory Port
Connection: DB-9 female
Data Rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
(default: 19.2 kbps)
Diagnostics
Performance: 15-minute, 24-hr, and 30-day monitoring (sampled every
second)