Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 132)

4-4 W A N s u i t e 5 1 6 0 / 5 1 3 0
CAUTION: If you do not enter a keystroke for 10 minutes, the terminal interface
logs you off automatically.
System Screen
The first option on the Main menu screen is the System screen (Figure 4.3).
This screen lets you view and set specific information about the unit in
service.
Figure 4.3 System Screen
The System screen displays the fields shown in the table below.
Field Description
Contact Read/write field used to store the name of a point-of-
contact for system failure.
Name Read/write field that holds the unit’s name.
Location Read/write field that holds the unit's location.
FrameStart ID Read/write field that holds the unit's ID that uniquely
identifies the unit and is used in the FrameStart
applications.
Blank Fields Read/write fields for user-specific labels and values.
Information resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting
in standard 24-hour HH:MM:SS format.
Date Read/write field that holds the unit's internal date setting
in standard MM/DD/YY format.