Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 159)

V T 1 0 0 I n t e r f a c e 4-31
Rx Invalid Alarm Status of this alarm (OK, Alarmed).
User prompts at the bottom of the Frame Relay Services Details screen are
described in the following table.
Frame Relay Statistics Screen
Select the “Frame Relay Statistics” prompt to bring up a table (Figure 4.26)
that reports on the status and condition of LMI parameters and on Receive/
Transmit alarms and thresholds. Alarm threshold levels may be changed by
entering a new threshold value in the appropriate field on the Frame Relay
Service Details screen and pressing the “Esc” key.
Figure 4.26 Frame Relay Statistics Screen
To view the Port Statistics (Figure 4.27) for a specific interval, select that
interval from the Frame Relay Statistics column.
Prompt Function
Frame Relay
Statistics
Opens the Frame Relay Statistics screen for the current frame
relay service.
Clear Alarms Clears all Frame Relay alarms.
Pair Type Details Opens another Frame Relay Service Details screen that reverses
the service and the pair so that you can view both sides of the
pair.
DLCI Table Opens the DLCI Table screen, which displays all the DLCIs on
the current service. Refer to DLCI Table Screen on page 4-49 for
more information.