Teac MX-View Version 1.0b1 - Manual (Page 37)

37
Place the playhead prior to the In point by the desired amount and press play. The
recorder will begin to play and will punch into record at the In point. It will punch out of
record and back into play at the Out point. You must press stop for the transport to stop.
Auto Rehearse works in the same manner, except that instead of switching to record
mode, the MX switches to input allowing you to audition the record process. To enter
Auto Rehearse mode you must press Auto followed by the Rehearse button. The
Rehearse button will blink yellow and the Auto button will appear solid yellow. To begin
an Auto Rehearse, press play.
To exit either Auto Rehearse or Auto Record click once on the Auto button.
Note: You can use Auto Record with Pre and Post roll to easily provide auto punch
capabilities.
Q
K Auto Record/Rehearse mode: Ctrl + Shift + A on Microsoft Windows, Cmd + Shift + A
on Macintosh.
5-30 Loop Record
Several types of Loop modes are available in MX-View:
•
Play Repeatedly (default): This mode will continuously record over the existing
audio without stopping.
•
Play Once and Stop: This mode will record once and stop at the Post-roll
location following the Out point.
•
Play Once and Cue: This mode will record once and place the playhead at the
Pre-roll location before the In point.
For more detail on these settings please refer to the Menu Bank 200: System Controls
section of the Complete MX-2424 User Manual (page 38).
Before performing a Record Loop, you must choose and set the loop mode you desire in
MX-2424 Menu 210. Next set the desired In and Out points, record-arm the desired
tracks, and click the Auto button in the Transport. The Auto button should now appear
solid red. Press the record button in the transport so that it and the record-armed tracks
are blinking. Click on Loop in the Transport window to begin the record loop. The
transport will look as follows:
Note that a Rehearse Loop can also be performed in the same manner: only the Rehearse
button is armed instead of the Record button.
Auto (Solid Yellow)
Rehearse (Blinking Yellow)
Record button solid red
Auto button solid red
Transport in Play
Loop button solid yellow