Teac MX-View Version 1.0b1 - Manual (Page 25)

25
Q
K New Project: Ctrl+N on Microsoft Windows, Cmd+N on Macintosh
Opening Projects:
To open an existing project, select File Menu
→ → → → Project/Track. This will open the
Project/Track window.
Note that the Project/Track window may contain a number of machines with a number of
disks. Click on the desired machine and disk ID so that all projects on disk are visible. To
open an existing project, double click on the desired project icon. A list of Project/Track
window icons is available in Appendix D.
Q
K Opening a Project: Ctrl + O on Microsoft Windows, Cmd + O on Macintosh
Closing Projects:
When a new or different project is opened, the current loaded project is automatically
closed. If you wish to close a project and power down the recorder, you must first
unmount all disk drives. Unmount is located in the Volumes menu of the Project/Track
window as well as on the recorder front panel. Following the unmount, you may turn off
the machine.
Note: Projects are automatically saved to disk once you have pressed stop and the Busy and Disk
LEDs are no longer active .
4-6 Working with Tracks
Three types of tracks exist in MX-View: Loaded Tracks, Virtual Tracks, and Unloaded
Tracks.
Loaded Track (Active Track)
A Loaded Track in MX-View is much like a track on a multi-track tape deck. You can
play back all loaded tracks simultaneously and record different instruments on different
tracks. Loaded tracks appear in the main MX-View window and are referred to as
“active” tracks, due to their record and playback ability. You can edit and organize
numerous audio events on each track.
Disk
Track
Project
Unmount all disks