Teac MX-View Version 1.0b1 - Manual (Page 17)

17
3-13 Basic Playback and Record
Recording:
Use the record arm buttons to select the tracks you wish to record onto.
To begin recording, click the record button in the Transport Window so that it is blinking,
followed by the Play button. The blinking record button and record arm buttons will turn
solid - you are now recording.
To stop the recording, press the spacebar or use the Stop button in the Transport window.
Disarm any record-armed tracks.
Playing Back Your Recording:
To move the playhead to the beginning of the project, click the Head button located in the
Transport window.
You may then click the play button or press the Spacebar key to begin playback of your
recorded audio.
The playhead can be moved anywhere in the main MX-View window with a single click
of the mouse, when in Selector Tool mode (
).
Playback, Record and Navigation is covered in detail in Chapter 5.
3-14 Performing a Copy and Paste Edit
Selecting an area:
In order to select an area for edit the Edit Sound event icon must be selected (located in
the Edit bar). Note that the Edit Sound Event must be selected for all audio event editing.
To select an area, use the Selector Tool in the Transport window ( ).
Click and drag over the desired audio region so that it appears highlighted.
Record arm
Play and Record are both solid when in record
Locate to Head
Edit Sound Event