Omnia Audio Omnia.9 - Manual (Page 50)

Stereo Enhancer Menu
,DE@8
F==
ELD9LJ<;@EK?< LII8I;C
N?P8E;@JEI8P<;FLK
1?@J8GGIF8:?J@>E@X:8EKCPI<;L:
:?8E:N@K?8JKIFE>:
shifted out of phase and offers much greater control over the stereo enhancement available in various
portions of the spectrum.
R The Stereo Enhancer D@M
/<;L:K@FEKK8:BJG<<;8E;/
R The Enable control turns the Stereo Enhancer on or off.
R The Target Width control determines the ratio of L+R to L-R. Higher settings provide more stereo
K?
L-R to overpower L+R which ruins mono compatibility and increases multipath distortion.
R The Maximum Gain control determines how much the Stereo Enhancer can increase L/R
separation in an effort to achieve the Target Width in program material that has a narrow stereo
image. The range is between 0 and 18dB.
R The Maximum Attenuation control determines how much the Stereo Enhancer can reduce L/R
separation in an effort to achieve the Target Width in program material that already has a wide
stereo image. The range is between 0 and 18dB.
R The Attack control determines the speed at which the stereo image is narrowed. The Release
control determines the speed at which the stereo image is widened.
R The Target Width:FLGC<; Maximum Gain:FLGC<; Maximum Attenuation:FLGC<; Attack
(coupled) and Release:FLGC<; :FEKIFCJ8CCFN PFL KF8;ALJK8CC K?<98E;J J@DLCK8E
equal amount in their corresponding sections.
Multiband Setup Menu
The Multiband Setup menu provides control over the number of processing bands employed as well as
K?8@EGIF>I8K8K<;
found here are the enable buttons for gain reduction override and controls for the gain reduction ratio.
Chapter 9: FM Menu - Processing for FM
50