Omnia Audio Omnia.9 - Manual (Page 139)

GPI Enable
The GPI Enable control is used to turn GPI on or off. Please note that GPI must be disabled in order to
<;@K8E;:FEX>LI
GPI Function A-D / E-H
R The Function control in each GPI channel - A through H - determines which available parameter is
affected when the input signal is received.
R The Lo and Hi:FEKIFCJNFIB KF>
selected by the Function control.
Pins 2 through 9 are GPI inputs 1 through 8. Pins 18 through 25 are ground.
&=8JPJKI@:8:FEK8:K:CFJLI<=IFD$-&KF>IFLE;@JT8><;U8E;8EFG
“”not engaged”.
&=JLGGC@<;9P83$-,3@J$-&T8><;U8E;3@J$-&TEFK8><;U
3J@>E8CN@CC8CJFNFIB
Chapter 18 System Menu
139