Metric Halo Mobile I/O - Manual (Page 93)

LIO-8 Users Guide
93
Monitor Controller
Nominal FS output (Balanced) Output Jumper On
-12.0 dBu
Maximum Output Same as Line
Gain Range -96 dB to +30 dB
Gain Precision ±0.05 dB
Gain Step 0.5 dB
Table 7.4. LIO-8 Line Input + ADC
Line Input + ADC
Input Impedance
10k Ω
Dynamic Range (-60 dB, flat 0-22.05 kHz, typ) 115 dB
Dynamic Range (-60 dB, A-weighted, typ) 118 dB
Noise Floor (flat 0-22.05 kHz, typ) 115 dB
Noise Floor (A-weighted, typ) 117.9 dB
THD D/A/A/D loop @ -12 dBFS 0.0005 %
THD D/A/A/D loop @ -0 dBFS 0.0015 %
Crosstalk @ 1kHz -127 dB
IMD 1k component (19 kHz/20kHz @ +8dBu) -104 dBu
Gain Range -12 dB to +31.5 dB
Gain Precision ±0.05 dB
Gain Step 0.5 dB
Table 7.5. LIO-8 Line Input + ADC Frequency Response
Line Input + ADC Frequency Response
+0/-0.1dB @ fs = 44100 Hz
5.7 Hz - 20.5 kHz
+0/-1.0dB @ fs = 44100 Hz 1.8 Hz - 21.0 kHz
+0/-0.1dB @ fs = 96000 Hz 5.7 Hz - 43.9 kHz
+0/-1.0dB @ fs = 96000 Hz 1.8 Hz - 45.4 kHz
+0/-0.1dB @ fs = 192000 Hz 5.7 Hz - 42.1 kHz
+0/-1.0dB @ fs = 192000 Hz 1.8 Hz - 64.7 kHz
5° low-end in-channel phase deviation point 10.7 Hz
Interchannel phase 0 Hz - 20 kHz < ±0.05°
Crosstalk from SMPTE Input < -142 dB
Table 7.6. LIO-8 Converter Latency
Latency
A/D
63 samples
D/A 44 samples
Table 7.7. LIO-8 Input Processing
Input Processing
M/S Decode
Instantiable