Metric Halo Mobile I/O - Manual (Page 80)

ULN-2 Users Guide
80
Mic Inputs
• Harmonic Distortion @1kHz
• (+9dBu in @ 6 dB Gain) 0.0005%
• Intermodulation Distortion 1k component
• (19 kHz/20kHz @ +8dBu) -96 dBu
Table 6.2. ULN-2 Equivalent Input Noise (E.I.N.) 20 Hz – 20 kHz Flat @ 72 dB Gain
Equivalent Input Noise (E.I.N.)
150 Ω Source
-130.5 dBu
50 Ω Source -132.0 dBu
0 Ω Source -134.0 dBu
Table 6.3. ULN-2 Frequency Response
Frequency Response
18 Hz – > 20 kHz
± 0.1 dB
8 Hz – > 50 kHz -± 1.0 dB
3 Hz – >100 kHz ± 3.0 dB
Table 6.4. ULN-2 Crosstalk @1kHz
Crosstalk @1kHz
trim link engaged
-107 dB
trim link disengaged -132 dB
Table 6.5. ULN-2 Maximums
Maximums
Max Gain
72 dB
Preamp Headroom 20 dB above Digital Clip
Phantom Power +48v Regulated, high current, individually switch-
able, P48 test compliant, short circuit/ hot-swap pro-
tected
Table 6.6. ULN-2 Converter Latency
Latency
A/D
39 samples
D/A 28 samples
Table 6.7. ULN-2 Input Processing
Input Processing
M/S Decode
Instantiable
Parameteric EQ Instantiable
Dynamics Instantiable
Character Instantiable
Reverb Instantiable
Delay Instantiable