Metric Halo Mobile I/O - Manual (Page 207)

Routing Examples
207
Figure 13.8: Making the Output Assignment
Finally, we need to add a HaloVerb reverb plug-in to the Reverb bus return:
Figure 13.9: Selecting the Reverb Plug-in
Once you insert the plug-in, you will see the HaloVerb UI with the Factory Default settings:
Figure 13.10: Factory Default Settings
Now, for the configuration we have set up, with a dedicated return for the reverb that will be mixed back in
with the Monitor bus, we really don’t want to have the dry signal of the Reverb bus mixed back in; rather we
want to have the 100% wet signal, so we need to turn down the Direct dB parameter to mute the dry signal:
Figure 13.11: 100% Wet Default Settings
Now everything is basically configured. You can set up the dry headphone mix on the main faders in the
Mixer window. Once we have basic balances set, you can switch to the Send window. In the Send mixer we