Metric Halo Mobile I/O - Manual (Page 290)

+DSP
290
Provides an integer sample delay from the input to the output. Changes in the delay time are interpo-
lated, allowing you to change the delay time with no glitches. For large changes in the delay time, the
interpolation has the effect of shifting the pitch of the delayed signal as the delay time is changing.
This version of the delay utilizes the external memory block for the delay buffer. If you get a message
that MIO Console can't instantiate the plug-in, try using the IM version.
Parameters:
Delay(samp)
[0, See table] samps
Specifies the delay throught the process block in samples.
Delay(ms)
[0, See table] ms
Specifies the delay throught the process block in milliseconds.
Master Bypass
{On, Off}
When engaged sets the delay through the block to 0.
Table 20.9. External memory delay times
Plug-in version Delay (samples) Delay (ms)
2k 2048 46.4172
3k 3072 69.6372
4k 4096 92.8571
5k 5120 116.077
6k 6144 46.4172
7k 7165 162.517
8k 8192 185.737
9k 9216 208.957
10k 10240 232.177
15k 15360 348.277
MIO MultiTap Delay
• Synopsis: MultiTap Delay
• Category: Delay, Building Blocks
• Channels: 1
Description:
The Medium and Long versions of this plug-in are not currently compatible with 2d Expanded
interfaces
MIO MultiTap Delay implements a multi-tapped delay line. The total delay line length in this imple-
mentation varies; see the table below. Each delay tap is independent from the other taps, and provides
controls to set the tap delay, gain level and polartity invert. Each tap can be enabled and disabled
independently as well.
The delayed signal for each tap is available on dedicated outputs for further processing. The contri-
butions of each tap are also summed together and the summed signal is available on the last output
of the processing block.