Metric Halo ULN-R - Manual

The ULN-R Mic Pre (Ch. 1-4) kit includes the following parts:
1
DB25 connector board
1 4 channel ULN-R mic pre board
1 3 pin phantom power cable
1 20 pin ribbon cable jumper
2 7/16” standoffs
3 Phillips head screws
The ULN-R Mic Pre (Ch. 5-8) kit includes the following parts:
1
4 channel ULN-R mic pre board
1 20 pin ribbon cable jumper
4 Phillips head screws
The Ch. 1-4 kit must be installed for the Ch 5-8 kit to function!
To install the ULN-R mic pre option in the LIO-8 you will need:
- #1 Phillips screwdriver
- 7/16” nutdriver (Ch. 1-4 kit only)
- silicone caulk
Please familiarize yourself with the parts and instructions before opening the LIO-8.
Be sure to discharge any static energy on your body before touching the interior of the LIO-8.
ULN-R Mic Pre Installation