Signal flow, Making connections to the uln-2, 74 making connections to the uln-2 – Metric Halo Mobile I/O User Manual
Page 74: Uln-2 signal flow
ULN-2 Users Guide
74
• switchable +4/-10 level
• 2 channels balanced Monitor output with front panel level control
• Connect these outputs directly to power amps or self powered monitors
• 4-pin XLR power port for use with broadcast batteries
• Compatible with any 4-pin XLR power system with the following characteristics: 9v - 30v DC, Pin
4 Hot, 15 Watts
• TOSLINK connectors for ADAT Optical or Optical SPDIF I/O
• Wordclock input/output on BNC connectors
• 256x Wordclock input/output on BNC connectors
• Stereo S/PDIF input/output on RCA connectors
• Stereo AES/EBU input/output on XLR connectors
• 2 IEEE 1394 (FireWire) ports (400 Mbps)
• 1 2.1mm DC power jack (9v - 30v, center positive, 15 Watts)
Signal Flow
Figure 6.11: ULN-2 Signal Flow
Making connections to the ULN-2