Analog input control, Front panel prefs sheet – Metric Halo Mobile I/O User Manual
Page 145
MIO Console Overview
145
Figure 11.7: Front Panel Prefs Sheet
The options are:
• Input Links matrix
Allows you to link input channel encoders (more info in the
).
• Output Links matrix
Allows you to link output channel encoders (more info in the
).
• Front Panel Brightness
Scales the brightness level of the front panel (more info in the
• Front Panel Normal Intensity
Sets the maximum illumination level; the brightness scales to this point.
• Numeric Hold Time
The time in seconds that the meters display numeric levels after adjusting an encoder.
• Clip Hold Time
The time in seconds that the meter LEDs stay red after clipping occurs.
• Input Clip Threshold
The input level at which a signal is considered clipped.
• Output Clip Threshold
The output level at which a signal is considered clipped.
• Front Panel Knob Gain Steps
Normal: The amount of gain change per encoder click when not pushed in.
Pushed In: The amount of gain change per encoder click when pushed in.
• Enable IR Remote and Edit IR
Enabling this option will activate the infrared remote receiver on the selected unit's faceplate; the "Edit
IR…" button will open the Infrared Remote Preferences window (more info in the
).
Analog Input Control
For each analog input channel on the Mobile I/O (except the ULN-2, as it has analog front panel controls),
you will find a channel strip that contains: