Metric Halo Mobile I/O - Manual (Page 292)

+DSP
292
Invert
{Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable
{Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp)
[0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain
[-160, 10] dB
Sets the gain of the delayed signal.
Invert
{Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable
{Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp)
[0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain
[-160, 10] dB
Sets the gain of the delayed signal.
Invert
{Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable
{Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp)
[0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain
[-160, 10] dB
Sets the gain of the delayed signal.
Invert
{Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable
{Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp)
[0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain
[-160, 10] dB
Sets the gain of the delayed signal.