Metric Halo Mobile I/O - Manual (Page 23)

23
1. 2882 Quick Start Guide
Figure 1.1: Mobile I/O 2882
Prepare the unit for use
Unpack the 2882 and make sure all the parts are there:
• One Mobile I/O 2882 unit
• One IEC Power Cord appropriate for your area
• One 24-volt 48-watt world-ready external power supply
• One 30” IEEE 1394 9-pin to 6-pin FireWire Cable
• One 4.5 meter IEEE 1394 9-pin to 6-pin FireWire Cable
• Two Rack Ears w/ fasteners
• Rubber feet
• MIO Software CD-ROM
• Warranty/Registration Card
Bask in the look and feel of the 2882! Once you’re finished, connect the power supply, and connect your
monitors to Analog Out 1/2. Many people find it useful to put a pad between their amps or powered monitors
and the 2882’s outputs; this allows the 2882 to work at full digital resolution without overdriving the amplifiers.