Metric Halo Mobile I/O - Manual (Page 300)

+DSP
300
Inv
{Off, On}
Sets the sign of the cubic coefficient (the sign is negative when enabled).
Inv
{Off, On}
Sets the sign of the quartic coefficient (the sign is negative when enabled).
Master Gain
[-300, 12] dB
Sets the overall gain of the output post mapping.
Master Bypass
{On, Off}
When enabled, bypasses the process so that the output is the same as the input.
MIO 4th Order [dB] Symmetrical Nonlinear Map
• Synopsis: 4th Order [dB] Symmetrical Nonlinear Map
• Category: Distortion, Building Blocks
• Channels: 1
Description:
MIO SNL(4) [dB] Map applies a symmertrized version of the nonlinear map specified by the parame-
ters. This means that the applied non-linearity has the same relative polarity to the input signal polar-
ity. You can use this to apply a non-linearity that always reduces the amplitude of the input signal,
whether the input is positive or negative.
The non-linearity generated by this symmeterized map generates high-order odd harmonics for the
even order terms, and low-order odd harmonics for the odd order terms.
Parameters:
x^1
[-300, 12] dB
Sets the coefficient (in dB) of the linear term of the map.
x^2
[-300, 12] dB
Sets the coefficient (in dB) of the quadratic term of the map.
x^3
[-300, 12] dB
Sets the coefficient (in dB) of the cubic term of the map.
x^4
[-300, 12] dB
Sets the coefficient (in dB) of the quartic term of the map.
Inv
{Off, On}
Sets the sign of the linear coefficient (the sign is negative when enabled).
Inv
{Off, On}
Sets the sign of the quadratic coefficient (the sign is negative when enabled).
Inv
{Off, On}
Sets the sign of the cubic coefficient (the sign is negative when enabled).
Inv
{Off, On}
Sets the sign of the quartic coefficient (the sign is negative when enabled).
Master Gain
[-300, 12] dB
Sets the overall gain of the output post mapping.